These drivers are designed exclusively for Eluktronics RP-15 & RP-17 series with a 2060 GPU's. NOTE: If you purchased your PC with an operating system pre-installed, you do not need to download and install anything else unless there is an "*" next to something below that has been updated after your purchase date:

01 - Chipset & APU

02 - Intel Wlan

03 - Intel Bluetooth

04 - Nvidia Graphics *Update 2/11/23

05 - Card Reader

06 - Control Center *Update 4/20/21

07 - LAN

08 - RAID

09 - Audio *Updated 3/12/21

10 - THX *Updated 3/12/21

(Public Release 12/02/2021)

RP-15 & RP-17 + RTX 2060 BIOS Update

How to perform BIOS update:

1. Format a USB flash drive using FAT32. Unzip and copy all of the contents of the BIOS files directly into the root of the USB.
2. Ensure AC adapter is plugged in.
3. Restart the system and ensure “Secure Boot” is disabled from BIOS (F2 during boot) setup menu.  Save and exit.
4. As soon as the Eluktronics boot logo re-appears, tap "F7" repeatedly to access the boot options.  Select the respective USB device.
5. You will now enter the EFI shell environment (looks kind of like command prompt).  Depending on the amount of storage drives or partitions you have internal to your Eluktronics laptop, enter the appropriate path.  Example: Type "FS0:", press enter, type "LS" to list the directory.  If you find the EFI and ROM files here, continue to the next step.  If not, try FS1: and continue until you find the path. (Commonly FS3 for most customers with a single drive).
6. Type “F.nsh” and press enter.  
7. The system now perform the BIOS update and should reboot automatically once the BIOS update completes.  Do NOT unplug the AC adapter or press the power off during this process.
8. Go into BIOS setup menu and load optimal default settings under the “Exit” tab.
9. Repeat the same exact steps above except replace all files of the USB with the EC and enjoy!