These drivers are designed exclusively for Eluktronics MAX Series with Intel i7-11800H CPU's and NVIDIA 3000 Series GPU's. NOTE: If your system is missing any drivers please install these drivers before downloading a driver from the direct website, ie: Download our Nvidia Driver before downloading the latest version directly from Nvidia. Please contact support if you have any questions.
01 - Audio
02 - Card Reader
03 - Chipset
04 - Control Center (*Update - 3/14/2023)
06 - Intel Bluetooth
07 - Intel VGA
08 - Intel GNA
09 - Intel HID
10 - Intel Wlan
11 - IRST
12 - LAN *(Update - 04/04/2022)
13 - Nvidia Driver
14 - Serial IO
15 - THX APO
https://www.microsoft.com/store/productId/9NC521C2JHDK
16 - Thunderbolt
BIOS / EC Update Now Available for i7-11800H GEN CPU UNITS
(Public Release 06/09/2023)
THIS WILL TAKE OFF PREMA MOD
1. Format a USB flash drive using FAT32. Unzip and copy all of the contents of the BIOS files directly into the root of the USB.
2. Ensure AC adapter is plugged in.
3. Restart the system and ensure “Secure Boot” is disabled from BIOS (F2 during boot) setup menu. Save and exit.
4. As soon as the Eluktronics boot logo re-appears, tap "F7" repeatedly to access the boot options. Select the respective USB device.
5. You will now enter the EFI shell environment (looks kind of like command prompt). Depending on the amount of storage drives or partitions you have internal to your Eluktronics laptop, enter the appropriate path. Example: Type "FS0:", press enter, type "LS" to list the directory. If you find the EFI and ROM files here, continue to the next step. If not, try FS1: and continue until you find the path. (Commonly FS3 for most customers with a single drive).
6. Type “F.nsh” and press enter.
7. The system now perform the BIOS update and should reboot automatically once the BIOS update completes. Do NOT unplug the AC adapter or press the power off during this process.
8. Go into BIOS setup menu and load optimal default settings under the “Exit” tab.
9. Repeat the same exact steps above except replace all files of the USB with the EC and enjoy!
Do NOT unplug the AC adapter or press the power off during this process.
BIOS Update Now Available PREMA for i7-11800H GEN CPU UNITS
(Public Release 04/02/2022)
MECH-15 G3 i7-11800H + RTX 3070 BIOS Update
MECH-15 G3 i7-11800H + RTX 3080 BIOS Update
How to perform BIOS update:
1. Download the file specific to your model and graphics hardware (listed at the bottom of this thread). If for some reason you are uncertain of your hardware, this quite possibly may not be the update for you;) However, if you need assistance locating this information please contact support with your order information for validation. This is only designed for Eluktronics laptop models MECH-15 G3 with an Intel 11th gen i7-11800H processor.
2. Connect your power supply.
3. Temporarily suspend Bitlocker via OS (if enabled) and temporarily remove any BIOS or SSD passwords.
4. Proceed to perform the flash by unzipping the file anywhere such as your desktop and double clicking on "update".
5. Read through the terms and confirm all Windows prompts with "Yes" if you wish to proceed.
6. The system will perform the flash. After the flash is complete and the progress window has closed automatically, please manually shut down the system. The system can NOT be powered down until this has completed.
7. After powering down the system, turn it back on and wait. This will take a little longer than usual and the system may even reboot a couple times. During this time press and hold F2 until you see the BIOS Setup Menu.
8. Skip the 'load previous defaults' prompt by pressing 'ESC' once or toggling to "No".
9. You should now see your BIOS screen. Press 'F3' to load 'optimized defaults' and confirm with 'ENTER'.
10. Make important changes like 'RAID' (if applicable) to match your previous setup and then proceed to Save and Exit.